-
Logo/Nologo Keys and Remotes
- ALFA
- AUDI
- ACURA
- BENTLEY
- BMW
- BUICK
- CITROEN
- CADILLAC
- CHERY
- CHEVROLET
- CHRYSLER
- Ducati
- DAIHATSU
- DAEWOO
- DODGE
- FIAT
- FORD
- Ferrari
- GMC
- HOLDEN
- HONDA
- HYUNDAI
- ISUZU
- INFINITI
- JAGUAR
- JEEP
- KAWASAKI
- KIA
- LAMBORGHINI
- LADA
- LandRover
- LINCOLN
- LEXUS
- Maserati
- MITSUBISHI
- MERCURY
- MAZDA
- MERCEDES
- NISSAN
- OPEL
- PROTON
- Pantic
- Rover
- Porsche
- RENAULT
- PEUGEOT
- ROLLS-ROYCE
- Ssangyong
- SUBARU
- SEAT
- SKODA
- SUZUKI
- SAAB
- TOYOTA
- YAMAHA
- VOLVO
- VOLKSWAGEN
- Motocycle Transponder Key
- Transponder chips
- Key blades/Battery/Battery Clamps
- Silicon Rubber key cover & Button pad
- MERCEDES BENZ IR PROG
- AUTO LOCKS
- Cutting machines/Cutters
- Locksmith tool/OEM Lishi 2 in 1
-
Auto key programmer
- Original Brand Tool
- Packages & Offers
- Car Diagnostic Tool
- Auto Key Programmer
- ECU Chip Tuning
- Heavy Duty Diagnostic
- Mileage Programmer
- Car Diagnostic Software
- OBD2 Code Scanner
- VAG Diagnostic Tool
- Airbag Reset Tool
- OBD2 Cable and Connector
- Original AUGOCOM Tools
- Hot Car Accessories
- Hot Car Accessories
- Original Launch X431 Tool
- Factory Expired Tool
- KEYDIY/JMD
- special offer
Product Description
Autel MaxiDiag MD808 Pro is built to take your diagnostic experience to a whole new level. Loaded with oil service reset, battery registration and reset, parking brake pad relearn after replacement, steering angle sensor relearn and diesel particulate filter regeneration functions. MD808 Pro can access ALL available modules for the best diagnosis operations. With all that enclosed in a 4-inch hand-held device, there is no better multi functional scan tool on the market.
Autel MaxiDiag MD808 Pro All Modules Scanner Code Reader (MD802 ALL+MaxicheckPro)
Autel MD808 Pro Features
2. Diesel particulate/including forced regeneration
3.Reset steering angle sensor(SAS) functionality
4.Reset oil service and battery registration
5.Reset service mileage and service intervals
6.Perform OLS/oil service resets
7.Set inspection 1 & 2 service intervals
8.Open and close EPB(electronic brake calipers) for pad removal and service
9.Read and clear EPB/SBC trouble codes
10.Diagnose EPB/SBC(Sensotronic Brake Control) caliper functionality with bi-directional control
11.Perform O2 monitor,on-board monitor I/M readiness and component testing.
Autel MD808 Pro Functions List:
1.Read/Test/Clear trouble code all modules:Powertrain system,Body system,Chassis system,INFO & Communication
2.Auto VIN Detection
3.Auto Scan all major system
4.Live Data to test individual systems
5.Communicate with door modules,body controllers,electronic modules
6.Graph,record and playback freeze frame data.
7.Freeze Frame,Enhanced Mode 6,Vehicle Info,I/M Readiness,On-Board Monitor and Component Tests
Autel MaxiDiag MD808 Pro Views:
1.LCD Display--indicates test results.TFT color display(800*480 dpi)
2.Function Button--corresponds with "buttons" on screen for executing commands.
3.ESC Button--cancels a selection (or an action) from a menu or returns to the previous screen.
4.Up Scroll Button--moves up through menu and submenu items in menu mode. When more than one screen of data is retrieved, moves up through the current screen to the previous screens for additional data.When looking up DTC, it is used to change value of selected character.
5.Left Scroll Button--when look up DTC definitions, moves to previous character and views additional information on previous screens if DTC definition covers more than one screen; views previous screen or previous frames of recorded data. It is also used to view previous trouble code when viewing DTCs.
6.Right Scroll Button--when look up DTC definitions, moves to next character and view additional information on next screens if DTC
definition covers more than one screen; views next screen or next frames of recorded data.. It is also used to view next trouble code when viewing DTCs.
7.Down Scroll Button--moves down through menu and submenu items in menu mode. When more than one screen of data is retrieved,moves down through the current screen to next screens for additional data. When looking up DTC, it is used to change value of selected character.
8.OK Button--confirms a selection (or an action) from a menu.
9.Help Button--provides help information for the function conducted on the screen.
10.Connector--connects the scan tool to the vehicle’s Data Link Connector (DLC) via OBD II cable.
11.Micro SD Card Slot--holds the System Micro SD card.
Autel MD808 Pro Car List:
On the basis of all OBD II compliant vehicles, including those equipped with universal protocol – Control Area Network (CAN), MaxiDiag MD808/808 Pro Scanners expand vehicle system coverage and offer more diagnostic power to the vehicle technicians. Featuring expanded global vehicle coverage, the scan tools offer technicians a significant improvement on model years covered by supported manufactures.
Acura,Benz,Chrysler,Ford,Honda,Hyundai,Infiniti,KIA,Lexus,Renault,Scion,Toyota,VW...
For a complete listing of all the added vhicle,please check here
How to use Autel MD808 Pro to Perform Oil Reset?
There are two ways to perform the reset service.
Manual Reset
Almost all Asian vehicles and most American and European vehicles can be reset manually by technicians.
To finish this procedure, please follow these steps (Take Ford as an example):
1) Select Ford from the vehicle make screen and press OK.
2) Select the right options for your vehicle step by step according to each
screen that appears until the vehicle information is identified.
3) After entering the vehicle information, the scan tool will display a manual reset message, press OK to continue.
4) Follow the instructions to reset the service manually.
5) Press ESC to exit.
Auto Reset
Most American and European vehicles can be reset automatically by the scan tool.
To finish this procedure, please follow these steps (Take Peugeot as an example):
1) Select Peugeot from the vehicle make screen and press OK.
2) Select the right options for your vehicle step by step according to each screen that appears until the vehicle information is identified.
3) After entering the vehicle information, the scan tool displays manual reset message as below:
Comparison Table of Autel MD808 Pro, MD808 four system, MD802 four system, MD802 all systems:
| Product Comparision | ||||
 |  MD802(Four Systems) | MD802(All System) |  MD808(Four Systems) | MD808 Pro (All Systems) |
| Software Features | ||||
| Read/Erase Codes | Y | Y | Y | Y |
| View Live Data | Y | Y | Y | Y |
| View Freeze Frame Data | Y | Y | Y | Y |
| View I/M Readiness Status | Y | Y | Y | Y |
| View Vehicle Information | Y | Y | Y | Y |
| O2 Monitor Test | Y | Y | Y | Y |
| On-board Monitor Test | Y | Y | Y | Y |
| Component Test | Y | Y | Y | Y |
| Modules Presen | Y | Y | Y | Y |
| DTCs Help | Y | Y | Y | Y |
| Oil Service Reset | Y | Y | Y | Y |
| EPB Brake Pads Repalcement | Y | Y | Y | Y |
| Save and Playback Data | Y | Y | Y | Y |
| Print Data via Window PC | Y | Y | Y | Y |
| System Coverage | Engine,Transmission,ABS,SRS | All Systems | Engine,Transmission,ABS,SRS | All Systems |
| Steering Angle Learning | Y | Y | ||
| DPF Function | Y | Y | ||
| Battery Registration and Reset | Y | Y | ||
| Hardware Features | ||||
| Display | 320x240 dpi | 320x240 dpi | 800x480 LCD | 800x480 LCD |
| Memory | ? | ? | 32M+16G | 32M+16GS |
| Power Consumption | ? | ? | 1.7W | 1.7W |
| Weight | 208g(0.62lb) | 208g(0.62lb) | 313g(0.69lb) | 313g(0.69lb) |
Autel MD808 Pro Specifications
| Processor | ARM® Thumb® Processor (400 MHz) |
| Memory | 32MB, 166 MHz |
| Display | 4.0 inch LCD with 800x480 resolution |
| Connectivity | Mini USB: 2.0 Micro SD Card (16GB) |
| Power Consumption | 1.7 W |
| Operating Temperature | -10°C to 60°C (14°F to 140°F) |
| Storage Temperature | -20°C to 70°C (-4°F to 158°F) |
| Operating Humidity | 5% - 95% non-condensing |
| Housing | Strong plastic housing with protective rubber boot |
| Dimensions (W x H x D) | 202 mm x 92 mm x 35 mm (8.35” x 3.62” x 1.4”) |
| Weight | 313 g (0.69 lb.) |
Autel MD808 Pro Package includes:
1pc x User Manual
1pc x Quick Reference Guide
1pc x Main cable
1pc x Micro SD card
1pc x Carry case
1pc x USB Cable
New Mercedes BENZ KEY IR PROG2
A-class W169 2004-2010
B-class W245 2005-2010
C-class W203 2003-2007
CLK-class W208 2001-2002
CLK-class W209 2003-2008
C-class W204 2007-2009
E-class W210 2001-2002
E-class W211 2002-2007
E-class W212 2009-2010
CLS-class W219 2004-2009
S-class W220 2001-2005
S-class W221 2005-2009
CL W215 2001-2006
CL W216 2005-2009
SL R230 2001-2009
SLK R171 2004-2009
G-class W463 2002-2009
R-class W251 2005-2009
M-class W164 2005-2009
GL-class X164 2006-2009
Vito/Viano W619 2004-2009
Sprinter W906 2005-2009
B-class W245 2005-2010
C-class W203 2003-2007
CLK-class W208 2001-2002
CLK-class W209 2003-2008
C-class W204 2007-2009
E-class W210 2001-2002
E-class W211 2002-2007
E-class W212 2009-2010
CLS-class W219 2004-2009
S-class W220 2001-2005
S-class W221 2005-2009
CL W215 2001-2006
CL W216 2005-2009
SL R230 2001-2009
SLK R171 2004-2009
G-class W463 2002-2009
R-class W251 2005-2009
M-class W164 2005-2009
GL-class X164 2006-2009
Vito/Viano W619 2004-2009
Sprinter W906 2005-2009
Mercedes benz IR key prog
BENZ KEY IR PROG write Key data into MB Key via IR?
1. Program benz keys via IR.
2. Unlimited times erase and rewrite data via IR for any NEC benz remotes,
so no need worry for making mistakes!
3. No need remove The NEC Chip out from board for our benz remote
order our benz keys
4. Erase and rewrite data for OEM NEC chip data unlimited times!
1. Program benz keys via IR.
2. Unlimited times erase and rewrite data via IR for any NEC benz remotes,
so no need worry for making mistakes!
3. No need remove The NEC Chip out from board for our benz remote
order our benz keys
4. Erase and rewrite data for OEM NEC chip data unlimited times!
Smart Key Fob For Renault Megane II / Scenic II / Grand Scenic II
433MHz FSK
PCF7947A / HITAG 2 / 46 CHIP
Compatible Battery: CR2025
lsk 46/4D/48 copy machine HITAG clone machine
SPECIAL :THE 46copy chip for this machine is very cheap
Functions:
copy 46/4D/48 chip key with special 46 chip
you can choose and order 46 copy machine for this machine from choosen list.
